This is a demo frame that was built and ridden for a maybe 2000 miles. No blemishes. Can provide actual photos on request. Don't waste our time if you aren't serious, though. It's a Colnago. It's expensive, even when used. If you want cheap, visit eBay and take your chances.
270 Grams Less than the C60 Disc.
Maximum dimensions of 36.5 mm and tires up to 28 mm.
While lower weight has so far been the key point of the new frame, tire clearance is another important factor we had to address while designing the new C64. The frame has a clearance of a 36.5mm diameter at a 345mm radius, which means you can use all 28mm tires with plenty of room to spare. Brakes are the limiting factor here, so the disc version has a bit more space.
Completely redesigned Fork - Stiffer and weighs 40 grams less.
The C64’s fork has been fully redesigned, with an external rib-shape to give the rider more comfort (vertical compliance), but also to increase the handling (lateral stiffnes). To increase the stiffness and strength, they’ve created an internal rib in the steerer tube, which also holds the nut for the top cap and eliminates the need for an expander-plug. The C64 Disc fork features a C/D steerer tube shape, where the brake housing can run internally/hidden from the stem – for a neat assembly. The thru-axle, while still 12mm, like the C60 Disc, is now a threaded system to further reduce the weight of the bike. The fork length was increased by 5mm to be able to accomodate larger tires. Dropouts are now full carbon – replacing the alloy dropouts used on the C60.
Headtube is Lighter and stiffer thanks to the reduced thickness, the unidirectional fiber and the special inner rib.
While still retaining the same overall shape as the C60, the C64’s headtube features a new technology which allowed them to reduce the thickness and lower the weight. The shape was also revised to increase side stiffness. As was the entire frame, the headtube was changed from an outer 3k carbon finish to a lighter UD finish.
Based on the experience they had with the Concept’s headset, they wanted to bring that technology to this model as well. So they revised the upper cups, which are now made of a special polymer composed of carbon fiber and a special mix of nylon and elastomers. This feature offers the additional capacity to absorb road vibration, improving both handling and rider comfort.
Redesigned Downtube. The stellar section and the reduced width increase the torsional rigidity.
Starting with the design of the heavily shaped C60 downtube, they revised the bottom portion, which is now a bit narrower to match better with the rear triangle – for a perfect balance. To increase the torsional stiffness and maximize the integration of components, the downtube features a recessed bottle cage area which creates two long ribs around the middle of the downtube. Regardless of the fact that the C64 was not designed to be a purely aerodynamic frame, the recessed bottle cage gives a clear aero advantage over a traditional mounting position. Cable stops for mechanical shifting are now located on the downtube, in a tucked position behind the headtube.
New Seattube. Single piece monocoque, to make the frame more stiff without increasing weight.
Probably the most striking difference between the C60 and the C64 is that the seat tube meets the seat tube lug to form a single piece. This technical feature increased the stiffness of the frame, while keeping the weight low. The monostay is no longer straight either, but is cone-shaped to create the best possible gluing surface. Of course, this means they now have 14 different seat tubes for all 14 sizes!
Revised Rear Triangle. Full carbon dropouts and horizontal chain stays molded in one piece.
Another key area where they completely changed their technology is the chainstay/dropout area. The C64’s dropouts are now fully part of the chainstays. The one-piece construction allowed us to lower the weight, add vertical compliance, and retain the same lateral stiffness. The disc-brake frameset features threaded 12mm thru-axles and co-molded flat-mount brake provisions. This results in a very light but stiff full carbon rear end. The replaceable derailleur hanger is the very same, internally mounted hanger used on all their current road rim-brake frames. The lightweight seat stay is designed around very wide tires.
New Seat Clamp. A more elegant line, with the seatpost locking system completely hidden.
For a perfectly streamlined seatpost area, the C64 now features a hidden integrated clamp. Instead of a top-loaded, two-piece seatpost clamp, the C64 has a co-molded alloy bed, with a single removable part tightened from the bottom. The overall look is sleek, and the weight reduction is around 15gr compared to the other style. The bottom-pull concept also provides further locking strength as rider weights increase.
Setback, or Not - New Seatpost Options for Fit and Comfort.
Based on the shape of the V1-r seatpost, the semi truncated drop shape adds a bit of aero performance, while giving better vertical compliance compared to the previous round 31.6mm seatpost.
The default post has 15mm setback, while optional 0mm and 30mm will be available aftermarket.
Integrated cable guide for Mechanical Shifting.
Designed around their proven ThreadFit82.5, which is basically a PressFit with removable base sleeves, the bottom bracket lug is now more complex than ever, but simpler. The cable guide, which was typically a bolt-on plastic part, is now molded into the lug – to save grams as well as to offer the biggest possible radius for the best shifting performance. Another small detail is the hex shape on the side of the downtube insert, which is their datum point to check anything during the bonding of the frame and, later, the QC process.
A bottom bracket designed specifically for our frames.
From the beginning of the ThreadFit 82.5 project, the idea was ingenious: keep the reliability of a threaded BB but offer the benefit of a wider shell, typical of a PressFit system. Now, they’ve moved further forward with a collaboration with premium bearing brand Ceramic Speed. In conjunction, we’ve created our own threaded, wider bottom bracket, with best-in-class bearings. They will be offering 3 different bottom brackets (Campagnolo, Shimano, SRAM) as aftermarket purchase options.